Electrical symbols
Some of the basic symbols Cells in series and parallel

It can be difficult to draw electrical circuits, so to make it easier a system has been devised with symbols for each of the electrical components. In this topic you will be introduced to some of the more important components of electrical circuits and their symbols. See the topic Electric circuits for more on the operation of simple circuits.

Some of the basic symbols
The basic parts of a circuit are a power source or battery, wires, and a resistance or globe. Switches are also incorporated into circuits to control the flow of electric current.

The connecting wires in a circuit are represented by straight lines with dots to show where they are joined. If one connecting wire passes over another, without electrical contact, the symbol looks like a small bridge.

Click for larger image
The symbol for a cell has two parallel lines at right angles to the connecting wires. The thinner line marks the positive terminal of the cell and the thicker, shorter, line marks the negative terminal.

Click for larger image
A battery (more than one cell) is drawn as a series of cells, each usually adding 1.5 volts. A 6 volt battery looks like:


Resistors are devices that transform electrical energy supplied by the battery into thermal energy. Electric globes are resistors, changing the electrical energy into thermal energy and light energy.

The symbol for a resistor is:
Click for larger image
The symbol for a globe is:
Click for larger image

Click for larger image
Switches are used when it is required to turn a circuit on and off. Switches have two states: open (off) and closed (on).Click for larger image


Look at this simple circuit and their diagrams. Identify each of the components in the pictures and from the symbols.

 

Cells in series and parallel
Combinations of cells or batteries are discussed in the topic Batteries in series and parallel. Here we look at how their arrangements are represented.

Click for larger image
Cells in series are drawn as individual cells in a line, usually shown head to tail with no connecting wires.

Click for larger image
Cells in parallel are drawn as cells sitting besides each other, with connecting wires.

 

Copyright owned by the State of Victoria (Department of Education and Early Childhood Development). Used with Permission.

  FAQ:
  Why do I need to know these symbols?  
 
Related
Topics: 
  Batteries and cells in parallel
Current, voltage and resistance
Quantitative relationship between current, voltage and resistance
Ohm's Law
Resistances in series and parallel
Resistor values in colour
Electric circuits
Other symbols from electronics
Electricity in the home
Electrostatics
 
 
Quiz:
  Question 1
Question 2
Question 3
Question 4
 
 
Sites:
  N/A  
Glossary
 
Symbol Amplify
Polarised Capacitor